A Guide to Material Selection for 15 Types of Plastic Packagin

1. Retort Pouches

Packaging Requirements For meat, poultry and similar products. Good barrier performance, puncture resistance against bone shards. Must remain intact, crack-free, shrinkage-free and odorless under retort sterilization conditions.

Structural Designs

  1. Transparent types: BOPA/CPP, PET/CPP, PET/BOPA/CPP, BOPA/PVDC/CPP, PET/PVDC/CPP, GL-PET/BOPA/CPP
  2. Aluminum foil types: PET/AL/CPP, PA/AL/CPP, PET/PA/AL/CPP, PET/AL/PA/CPP

Design Rationale PET: High temperature resistance, good rigidity, excellent printability and high strength. PA: High temperature resistance, high strength, good flexibility, superior barrier performance and puncture resistance. AL: Excellent barrier properties and heat resistance. CPP: Retort-grade, good heat-sealing performance, non-toxic and odorless. PVDC: High-temperature resistant barrier material. GL-PET: Ceramic vacuum-coated film with good barrier properties and microwave permeability.

Select the proper structure for specific products. Transparent pouches are mostly used for retort processing; aluminum foil pouches are suitable for ultra-high-temperature sterilization.

2. Puffed Snack Food Packaging

Packaging Requirements Oxygen barrier, moisture barrier, light shielding, oil resistance, aroma retention, stiff appearance, bright color and low cost.

Structural Design BOPP/VMCPP

Design Rationale Both BOPP and VMCPP offer good stiffness. BOPP features excellent printability and high gloss. VMCPP provides great barrier performance for aroma retention and moisture blocking. CPP also has decent oil resistance.

3. Soybean Paste Pouches

Packaging Requirements Odorless, low-temperature sealability, resistance to seal contamination, good barrier performance and moderate cost.

Structural Design KPA/S-PE

Design Rationale KPA delivers excellent barrier properties and toughness, high lamination bonding strength to PE to prevent package breakage, plus good printability. Modified PE is a blend of multiple PE resins (coextruded), featuring low heat-sealing temperature and strong resistance to seal contamination.

4. Biscuit Packaging

Packaging Requirements Good barrier performance, strong light shielding, oil resistance, high strength, odorless and stiff package appearance.

Structural Design BOPP/EXPE/VMPET/EXPE/S-CPP

Design Rationale BOPP has good rigidity, good printability and low cost. VMPET provides superior barrier performance for light, oxygen and moisture blocking. S-CPP offers low-temperature heat sealability and oil resistance.

5. Milk Powder Packaging

Packaging Requirements Long shelf life, aroma and flavor retention, protection against oxidative deterioration and moisture caking.

Structural Design BOPP/VMPET/S-PE

Design Rationale BOPP has good printability, high gloss, decent strength and moderate price. VMPET provides excellent barrier performance, light shielding and good toughness with a metallic luster; reinforced PET with thicker aluminum coating is preferred. S-PE features anti-contamination sealing performance and low-temperature heat sealability.

6. Green Tea Packaging

Packaging Requirements Prevent deterioration, discoloration and flavor change, namely avoid oxidation of protein, chlorophyll, catechins and vitamin C in green tea.

Structural Designs BOPP / AL / PE, BOPP / VMPET / PE, KPET / PE

Design Rationale AL foil, VMPET and KPET are high-barrier materials with outstanding resistance to oxygen, water vapor and foreign odors. AL foil and VMPET also provide excellent light shielding. The material cost is moderate.

7. Edible Oil Packaging

Packaging Requirements Prevent oxidative deterioration, high mechanical strength, high burst resistance, high tear strength, oil resistance, high gloss and transparency.

Structural Designs PET/AD/PA/AD/PE, PET/PE, PE/EVA/PVDC/EVA/PE, PE/PEPE

Design Rationale PA, PET and PVDC have good oil resistance and high barrier performance. PA, PET and PE have high strength. The inner layer is special-grade PE with good resistance to seal contamination and high sealing tightness.

8. Milk Film

Packaging Requirements Good barrier performance, high burst resistance, light shielding, good heat sealability and moderate cost.

Structural Design White PE / White PE / Black PE

Design Rationale Outer PE layer delivers good gloss and high mechanical strength. The middle PE layer bears structural load. The inner layer serves as the heat-seal layer with light shielding, barrier and heat-sealing functions.

9. Ground Coffee Packaging

Packaging Requirements Resist moisture absorption and oxidation, withstand hard packed contents after vacuuming, and retain volatile, easily oxidized coffee aroma.

Structural Designs PET/PE/AL/PE, PA/VMPET/PE

Design Rationale AL, PA and VMPET have excellent barrier performance against water vapor and gas. PE offers good heat-sealing performance.

10. Chocolate Packaging

Packaging Requirements Good barrier performance, light shielding, attractive printing and low-temperature heat sealing.

Structural Designs Plain chocolate: Varnish / Ink / White BOPP / PVDC / Cold-seal adhesive Nut chocolate: Varnish / Ink / VMPET / AD / BOPP / PVDC / Cold-seal adhesive

Design Rationale PVDC and VMPET are high-barrier materials. Cold-seal adhesive enables sealing at extremely low temperatures without heat damage to chocolate. Nuts contain abundant grease prone to oxidation, so an extra oxygen barrier layer is added to the structure.

11. Beverage Pouches

Packaging Requirements Acidic beverages (pH<4.5): Pasteurization, general barrier performance. Neutral beverages (pH>4.5): Sterilization, high barrier performance.

Structural Designs

  1. Acidic beverages: PET/PE (CPP), BOPA/PE (CPP), PET/VMPET/PE
  2. Neutral beverages: PET/AL/CPP, PET/AL/PA/CPP, PET/AL/PET/CPP, PA/AL/CPP

Design Rationale For acidic beverages, PET and PA provide good barrier performance and withstand pasteurization; acidic conditions help extend shelf life. For neutral beverages, AL offers superior barrier performance, while PET and PA provide high strength to endure high-temperature sterilization.

12. Stand-up Pouches for Liquid Detergent

Packaging Requirements High strength, impact resistance, burst resistance, good barrier performance, rigid for standing, stress-cracking resistance and reliable sealing.

Structural Designs

  1. Body: BOPA/LLDPE; Bottom: BOPA/LLDPE
  2. Body: BOPA/Reinforced BOPP/LLDPE; Bottom: BOPA/LLDPE
  3. Body: PET/BOPA/Reinforced BOPP/LLDPE; Bottom: BOPA/LLDPE

Design Rationale The above structures have good barrier performance and high rigidity, suitable for stand-up pouches. The bottom layer features good flexibility for processing. The inner layer is modified PE with strong resistance to seal contamination. Reinforced BOPP improves mechanical strength and barrier properties. PET enhances water resistance and mechanical strength.

13. Lidding Films for Aseptic Packaging

Packaging Requirements Maintain aseptic conditions during packaging and consumption.

Structural Design Coating / AL / Peelable layer / MDPE / LDPE / EVA / Peelable layer / PET

Design Rationale PET acts as a peelable sterile protective film; it is peeled off before entering the aseptic filling zone to expose the sterile surface. The AL foil peel layer is torn open by consumers for drinking. A drinking hole is pre-punched on the PE layer, which is exposed once the AL foil is peeled. AL foil provides high barrier performance. MDPE has good rigidity and strong thermal adhesion to AL foil. LDPE is low-cost. The inner EVA has 7% VA content; EVA with VA>14% is not allowed for direct food contact. EVA offers low-temperature heat sealability and anti-seal-contamination properties.

14. Pesticide Packaging

Packaging Requirements Pesticides are highly toxic and hazardous to human health and the environment. Packaging must have high strength, good toughness, impact resistance, drop resistance and reliable sealing.

Structural Design BOPA/VMPET/S-CPP

Design Rationale BOPA has excellent flexibility, puncture resistance, high strength and good printability. VMPET features high strength and barrier performance; reinforced thick aluminum-coated grade is optional. S-CPP provides heat sealing, barrier performance and corrosion resistance, using terpolymer PP. Multi-layer coextruded CPP containing high-barrier EVOH or PA layers is also an alternative.

15. Heavy-Duty Packaging Bags

Packaging Requirements For agricultural products such as rice and beans, and chemical goods such as fertilizers. Main requirements: excellent toughness and necessary barrier performance.

Structural Designs PE/Woven PP fabric/PP, PE/Paper/PE/Woven PP fabric/PE, PE/PE

Design Rationale PE delivers heat sealability, good flexibility and drop resistance. Woven plastic fabric provides high tensile strength.

Share:

Facebook
Twitter
Pinterest
LinkedIn

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top